|
|
 |
| Royal Onyx™ Cyanoacrylate is a
single component adhesive that polymerizes rapidly when pressed into
a thin film between the clubhead and shaft. The moisture absorbed
on both surfaces initiates the curing of the adhesive. Royal Onyx™
forms a permanent strong flexible bond, designed for maximum impact
resistance. Royal Onyx™ bonds close fitting surfaces including
metal, graphite, plastic, rubber and wood. Use
only alcohol, not acetone,
when cleaning preparation is necessary. Shake well before using.
|
| Physical Properties of Liquid Adhesive: |
|
| Base Compound |
Ethyl Cyanoacrylate |
| Appearance |
Black liquid |
| Viscosity at 20°C |
1,900 cps |
| Specific Gravity |
1.0 |
| Shelf Life at 65°F |
1 years |
| Flash Point |
83°C/181°F |
| Set Time |
20-120 seconds |
Military Classification
Per Mil-A-46050-C |
Type II
Class 2 |
| Physical Properties of Solid Adhesive (cured): |
|
| Operating Temperature (°F) |
-40°F to 220°F |
| Dielectric Strength (KV/mn) |
11.6 |
| Coefficient of Thermal Expansion (in/in/F) |
1.26x10 to the negative 4 |
| Solubility |
Acetone, Nitromethane, MEK |
| Tensile Shear Strength, Psi Stainless
Steel 304 under regulation JIS 6861 |
|
3,200 in 30 minutes
7,350 in 24 hours |
| Set Time Across a 4 Mil Gap |
60 seconds |
|
| ©2012 Bob Smith Industries, Inc. |
 |
|
|
