• Find Product


    Dealer Locator
    On-Line Dealers

  • Call Us


    805-466-1717
     

  • Email Us


Industrial/Hobby Adhesives

  • ULTRA-CURE™

    is a very high performance clear cyanoacrylate that has a viscosity (thickness) in-between…

    read more
  • INSTA-CURE+™

    is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps…

    read more
  • INSTA-CURE™

    has a water-thin viscosity that wicks deep into joints by capillary action and cures in a…

    read more
  • MAXI-CURE™

    extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the…

    read more
  • IC-2000™

    is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on…

    read more
  • IC-GEL™

    is a cyanoacrylate paste that is extremely thick which comes in an applicator tube…

    read more
  • INSTA-FLEX™

    flexible thin CA is ideal for many applications, including the installation of CA hinges…

    read more
  • INSTA-FLEX+™

    clear rubber toughened has similar qualities to our black IC-2000™ but can be used in…

    read more
  • BSI’s POCKET CA™

    BSI has added a 4 oz. size to go along with our 3/4 oz. cyanoacrylates. These Pocket CAs…

    read more
  • PLASTIC-CURE™

    is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle…

    read more
  • IC-LOC™ GREEN

    is a thin, medium-high strength threadlock that is applied to fasteners that are already…

    read more
  • IC-LOC™ RED

    is a medium thickness, high strength threadlock that is applied to the threads of fasteners…

    read more
  • IC-LOC™ BLUE

    is a medium thickness, medium strength threadlock that is applied to the threads …

    read more
  • SUPER-GOLD™

    an odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 second…

    read more
  • SUPERGOLD+™

    an odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 second…

    read more
  • FOAM-CURE™

    is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal…

    read more
  • INSTA-SET™

    is a catalyst which acts as an accelerator that allows CAs to quickly cure…

    read more
  • UN-CURE™

    debonder will soften cured CA. If parts are bonded incorrectly or your fingers are…

    read more
  • SLOW-CURE™

    30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest…

    read more
  • MID-CURE™

    15 min. epoxy is used in larger areas where more working time is needed. It is more…

    read more
  • QUIK-CURE™

    5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it…

    read more
  • FINISH-CURE™

    20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be…

    read more